GE Aespire S5 Anesthesia Machine with 7900 Smartvent

GE Aespire S5 Anesthesia Machine with 7900 Smartvent Features Enhanced monitor integration capabilities with the GE / Datex Ohmeda Anesthesia Monitor Series. Lightweight and compact for easy maneuverability Optional integrated auxiliary O2 flowmeter and suction control Advanced Breathing System (ABS™) One step bag/vent switch turns the ventilator on/off A minimal number of parts and tube connections greatly reduces the potential for leaks and misconnects Ease of disassembly (no tools) Fully autoclavable and latex-free 7900 SmartVent Ventilator Volume and Pressure modes with electronic PEEP Synced intermittent mandatory ventilation ( SIMV ) Direct access to ventilator parameter settings PSVPro ( Pressure support with Apnea backup mode. ) Smart alarms direct user to specific problems and affected parameters Ideal for spontaneously breathing patients Improved low flow/reduced life cycle costs Only one scheduled maintenance check per year Fresh gas flow compensation – automatically (available with tidal volume compensation option) Minimum O2 flow of 50 mL Dual air flow tubes standard for higher resolution of low flows SPECIFICATIONS Physical Weight & Dimensions Height: 134.5 cm/52.9 in Width: 72 cm/28.3 in Depth: 73 cm/28.7 in Weight: Approximately 108 kg/238 lb Top Shelf Weight limit: 34 kg/75 lb Width: 66 cm/26 in Depth: 40 cm/15.75 in Work Surface Height: 81.7 cm/32.2 in Size: 2160 cm-2/334 in-2 DIN Rail Side of machine: 34.5 cm/13.6 in Drawers (internal dimensions) Height: 17.5 cm/6.9 in Width: 33 cm/13 in Depth: 26.5 cm/10.4 in Absorber Bag Arm (optional) Arm length: 30.5 cm/12 in Bag arm height (adjustable): 87 cm (34.3 i) to 104 cm (40.9 in) Casters Diameter: 12.5 cm/5 in Brakes: Individual locking front casters Electrical Specifications Current Leakage 100/120 V: < 300μA Power Power input: 100-120 Vac, 50/60 Hz Power cord: Length: 5 m/16.4 ft Rating: 15A @ 120 Vac Inlet/outlet modules (120 V) System circuit breakers: 15A Outlets (optional): 4 outlets on back, 3-2A, 1-3A individual breakers, optional isolation transformer Pneumatic Specifications Auxiliary Common Gas Outlet Connector: ISO 22 mm OD and 15 mm ID Gas Supply Pipeline input range: 240 kPa to 600 kPa/35 psig to 88 psig Pipeline connections: DISS-male, DISS-female, DIN 13252, AS4059, S90-116 or NIST (ISO 5359). All fittings available for O2, N2O, and Air, and contain pipeline filter and check valve. Cylinder input: Pin indexed in accordance with CGA-V-1 or DIN (nut and gland); contains input filter and check valve Note: Maximum 3 cylinders; two inboard mounted, one outboard mounted. Primary regulator diaphragm minimum burst pressure: 2758 kPa/400 psig Primary regulator nominal output: < 338 kPa/49 psig Pin indexed cylinder connections < 407 kPa/59 psig DIN cylinder connections Environmental Specifications System Operation Temperature: 10° to 40°C/50° to 104°F Humidity: 15 to 95% relative humidity (non-condensing) per IEC 68-2-3 Altitude: -440 to 3565 m/500 to 800 mmHg System Storage Temperature: -15° to 50°C/-5° to 122°F Humidity: 10 to 95% relative humidity (including condensing) per IEC 68-2-3 Altitude: -440 to 3565 m/500 to 800 mmHg Oxygen cell storage: -15° to 50°C/5° to 122°F; 10 to 95% relative humidity; 500 to 800 mmHg Electromagnetic Compatibility Immunity: Complies with all requirements of EN 60601-1-2 Emissions: CISPR 11 group 1 class B Approvals: UL 2601-1; CSA C22.2 #601.1; EN/IEC 60601-1; CE 0197